Additional Info

Stop / Go Manual Control Sign – R15

The R15 Stop / Go Manual Control Sign is a South African traffic-control sign used to manually control the movement of vehicles. It provides two instructions: STOP and GO. The person controlling traffic displays the appropriate side of the sign to indicate whether approaching drivers must stop or may proceed with caution.

The R15 sign is particularly useful where traffic needs to be controlled manually, such as during roadworks, temporary lane closures, maintenance activities and other situations where normal traffic movement is temporarily restricted or changed.

What Does the R15 Stop / Go Sign Mean?

The R15 sign communicates a direct instruction to approaching drivers.

• STOP: The driver must act as required for a Stop Sign and must not proceed until permitted to do so.
• GO: The driver may proceed with caution when the GO instruction is displayed.

The R15 arrangement allows traffic to be controlled manually at locations where vehicles cannot safely proceed in both directions at the same time or where temporary traffic conditions require a controlled movement of vehicles.

R15 Stop / Go Sign Colours

The R15 has two distinct sides for the STOP and GO instructions. The South African road-sign regulations specify a red retroreflective background with a white retroreflective border and legend for the STOP side.

The GO side uses a yellow retroreflective background with a black border and legend. These contrasting colours allow the traffic controller to communicate the required instruction clearly to approaching drivers.

How Does an R15 Stop / Go Sign Work?

The R15 sign is used by a person responsible for manually controlling traffic. The appropriate side of the sign is displayed towards approaching vehicles according to the traffic situation.

When the STOP side is displayed, drivers must stop and remain stopped until the traffic controller changes the instruction and the movement can proceed.

When the GO side is displayed, drivers may proceed with caution. Drivers should continue to observe the road, other vehicles, pedestrians, workers and any temporary traffic-control measures at the site.

The sign should be used as part of the overall temporary traffic-control arrangement rather than as a replacement for other signs, barriers, road markings or safety measures that may be required for the particular work area.

Where Is the R15 Stop / Go Sign Used?

R15 Stop / Go signs are particularly suitable for temporary traffic-control situations where vehicle movements need to be manually controlled.

Potential applications include:

• Road construction and maintenance
• Temporary roadworks
• Single-lane traffic arrangements
• Temporary lane closures
• Road rehabilitation projects
• Utility and infrastructure work
• Bridge and culvert maintenance
• Temporary traffic diversions
• Construction activities near roads
• Temporary access control
• Other approved temporary traffic-control situations

The exact traffic-control arrangement should be determined according to the road environment, work being carried out and applicable temporary traffic-management requirements.

R15 Stop / Go Sign for Roadworks

Roadworks can require traffic to share a restricted section of road when one lane is temporarily closed or when construction activities affect the normal traffic flow.

An R15 Stop / Go arrangement allows a traffic controller to stop vehicles travelling in one direction while allowing traffic from the opposite direction to proceed when the route is ready.

This can be useful on narrow sections where two-way traffic cannot safely pass through the available road space at the same time.

Manual Traffic Control During Construction

Construction and maintenance projects can create temporary changes to normal road conditions. Vehicles may need to pass through a restricted area while workers, equipment or construction activities are present.

An R15 Stop / Go sign can provide a clear instruction to drivers while the traffic controller manages the movement of vehicles through the affected section.

The person controlling traffic should remain in a suitable position where the sign can be clearly seen by approaching drivers and where the traffic-control operation can be carried out safely.

English and Afrikaans Stop / Go Sign

R15 Stop / Go signs supplied for South African applications may use the standard STOP and GO wording. Bilingual versions incorporating English and Afrikaans wording may also be available where required by the customer or project specification.

The appropriate sign format should be selected according to the requirements of the particular road, project and traffic-management arrangement.

Visibility of an R15 Stop / Go Sign

Visibility is important when using a manually operated traffic-control sign. Approaching drivers need enough opportunity to identify whether the STOP or GO instruction is being displayed.

The traffic controller should consider the position of the sign, approach distance, road alignment, lighting conditions, weather and potential obstructions.

Where work takes place during darkness or periods of reduced visibility, additional traffic-control equipment or measures may be required depending on the site and applicable requirements.

Who Should Use an R15 Stop / Go Sign?

An R15 sign should be operated by a person who is responsible for traffic control at the relevant site and who has the appropriate training, authorisation or instruction required for the particular traffic-management operation.

Personnel controlling traffic should follow the approved traffic-management procedures for the work site and should position themselves where they can safely communicate with approaching drivers.

R15 Stop / Go Sign in South Africa

The R15 designation identifies the Stop/Go traffic-control sign in the South African road-sign system. The South African road-sign regulations specify the meaning and colour arrangement of the STOP and GO sides of the sign.

For public-road work, temporary traffic-control signs should form part of the appropriate traffic-management arrangement and comply with the requirements of the responsible road authority and applicable South African requirements.

Contractors and project managers should consider the complete traffic-control setup, including signs, traffic controllers, barriers, cones, road markings and other temporary measures that may be required for the work being performed.

R15 Stop / Go Sign FAQs

What is an R15 Stop / Go Sign?

R15 is a South African traffic-control sign with STOP and GO instructions used to manually control vehicle movements.

What does the STOP side of an R15 sign mean?

When the STOP side is displayed, the driver must act as required for a Stop Sign and must not proceed until permitted to do so.

What does the GO side of an R15 sign mean?

When the GO side is displayed, the driver may proceed with caution, while continuing to observe the road and other traffic-control instructions.

What colour is the R15 Stop side?

The STOP side has a red retroreflective background with a white retroreflective border and legend.

What colour is the R15 Go side?

The GO side has a yellow retroreflective background with a black border and legend.

Where are R15 Stop / Go signs used?

They are commonly associated with temporary traffic-control situations such as roadworks, construction, maintenance, temporary lane closures and other activities where vehicle movements need to be manually controlled.

Can an R15 sign be used during road construction?

Yes. R15 Stop / Go signs are suitable for applicable temporary traffic-control arrangements where vehicles need to be stopped and released under manual control.

Can an R15 sign be used for permanent traffic control?

The R15 is intended for manual Stop/Go traffic control and is generally associated with situations where traffic movements need to be controlled manually. Permanent traffic control should use the appropriate permanent regulatory signs, road markings and traffic-control systems.

Does Signs4SA supply R15 Stop / Go signs?

Signs4SA can assist with R15 Stop / Go Sign requirements for roadworks, construction, maintenance and other suitable traffic-control applications. Contact us to discuss your required language, size, material and specification.

Request a Quote for an R15 Stop / Go Sign

The R15 Stop / Go Manual Control Sign provides a clear way to manually communicate STOP and GO instructions to approaching drivers. Its two-sided design allows traffic controllers to manage vehicle movements during suitable temporary traffic-control situations.

Contact Signs4SA to discuss your R15 Stop / Go Sign requirements, provide your specifications and request a quotation.

Stop / Go manual control sign signs come in a variety of styles and formats, including danger signs, warning signs, and caution signs. Danger signs are used to indicate an immediate threat that could cause serious injury or death, such as high voltage areas or hazardous materials. Warning signs are used to indicate potential hazards that could cause injury, such as slippery floors or falling objects. Caution signs are used to indicate potential hazards that could cause minor injury, such as low ceilings or uneven surfaces. Another type of safety sign is the Stop / Go manual control sign sign, which is used to provide guidance on safe behavior. These signs can include instructions on how to use equipment or machinery safely, as well as reminders to wear personal protective equipment (PPE) or follow specific safety protocols. Stop / Go manual control sign signs can also be used to ensure compliance with safety regulations. For example, fire safety signs are required by law in most public buildings and workplaces. These signs indicate the location of fire exits, fire extinguishers, and other fire safety equipment.

More About Stop / Go manual control sign

Safety signs are an essential part of any workplace or public space. They are used to warn people of potential hazards, provide guidance on safe behavior, and ensure compliance with safety regulations. One type of safety sign is the Stop / Go manual control sign sign, which is designed to alert people to potential dangers in a particular area. Stop / Go manual control sign signs come in a variety of styles and formats, including danger signs, warning signs, and caution signs. Danger signs are used to indicate an immediate threat that could cause serious injury or death, such as high voltage areas or hazardous materials. Warning signs are used to indicate potential hazards that could cause injury, such as slippery floors or falling objects. Caution signs are used to indicate potential hazards that could cause minor injury, such as low ceilings or uneven surfaces. Another type of safety sign is the Stop / Go manual control sign sign, which is used to provide guidance on safe behavior. These signs can include instructions on how to use equipment or machinery safely, as well as reminders to wear personal protective equipment (PPE) or follow specific safety protocols. Stop / Go manual control sign signs can also be used to ensure compliance with safety regulations. For example, fire safety signs are required by law in most public buildings and workplaces. These signs indicate the location of fire exits, fire extinguishers, and other fire safety equipment. In addition to these types of safety signs, there are also specialized signs available for specific industries or hazards. For example, construction sites may use signs to indicate the location of underground utilities or to warn of falling debris. Healthcare facilities may use signs to remind employees to wash their hands or to indicate the location of first aid supplies. When selecting safety signs, it is important to choose signs that are appropriate for the specific hazard or situation. Signs should be placed in prominent locations where they are easily visible, and should be made from durable materials that can withstand harsh environmental conditions. By using safety signs effectively, businesses and organizations can help protect their employees, customers, and visitors from harm.

Customer Reviews