Additional Info

Proceed Right Only R106 Road Sign

The Proceed Right Only R106 road sign is a South African regulatory command sign that instructs drivers to proceed only in the direction indicated by the arrow. For R106, the required direction is to the right.

The R106 sign is primarily used at intersections where vehicles are required to follow a specific direction of travel. It provides a clear instruction to drivers and helps control the movement of traffic through junctions and other controlled road layouts.

What Does the R106 Proceed Right Only Sign Mean?

The R106 sign means that a driver must proceed only in the direction shown by the right-pointing arrow. It is a command sign rather than a general warning sign, so the direction indicated by the sign must be followed where the sign applies.

South African road-sign guidance identifies R105, R106 and R107 as the Proceed Left Only, Proceed Right Only and Proceed Straight Only command signs. These signs require drivers to proceed only in the direction indicated by the arrow.

Where Is the R106 Road Sign Used?

The R106 Proceed Right Only sign is commonly used at intersections and other road layouts where traffic must proceed to the right. Typical applications include:

• Road intersections
• Junctions where rightward movement is compulsory
• Traffic-management layouts
• Roads with restricted movement options
• Divided or channelised intersections
• Temporary traffic-management arrangements where applicable
• Private roads and controlled traffic areas where directional control is required
• Industrial, commercial and property access roads

R106 at Intersections

Intersections are a primary application for the R106 sign. Where the road layout requires traffic to proceed to the right, the sign communicates this requirement before or at the relevant point of movement.

Drivers should also observe traffic lights, road markings, pedestrian crossings, other road signs and the actions of other road users when approaching the intersection.

R106 Road Sign Action

The required action for an R106 sign is straightforward: proceed only to the right in the direction indicated by the arrow.

Drivers should not interpret the R106 as simply suggesting that turning right is an optional route. Where the command sign applies, it communicates a mandatory direction of travel. The South African Department of Transport describes R106 as imposing a mandatory requirement to proceed only in the direction indicated by the arrow.

R106 vs R104 Keep Right

The R106 Proceed Right Only and R104 Keep Right signs both use a right-pointing directional symbol, but they have different purposes.

• R104 Keep Right: Instructs drivers to pass to the right of an obstruction such as a traffic island.
• R106 Proceed Right Only: Instructs drivers to proceed only in the direction indicated by the arrow, typically at an intersection.

The South African road-sign manual distinguishes these signs according to their location and purpose. Keep Right is associated with obstructions, while Proceed Right Only is associated with intersections and compulsory direction of travel.

R106 vs R109 Turn Right

The R106 and R109 signs are also different and should not be treated as interchangeable.

• R106 Proceed Right Only: Requires traffic to proceed only in the direction indicated by the right-pointing arrow.
• R109 Turn Right: Indicates the direction in which drivers must turn at the intersection ahead.

This distinction is useful when selecting the correct road sign for an intersection because the signs communicate different traffic movements.

R105, R106 and R107 Proceed-Only Signs

The R106 forms part of a group of three proceed-only command signs:

• R105: Proceed Left Only
• R106: Proceed Right Only
• R107: Proceed Straight Only

These signs use directional arrows to communicate the required direction of travel. The correct sign depends on the movement that drivers are required to make at the particular road location.

Permanent R106 and Temporary TR106 Signs

The permanent R106 sign has a blue retroreflective background with a white retroreflective border and arrow. A temporary version, TR106, is used within the temporary traffic-sign system and uses the applicable temporary sign colours.

Temporary traffic signs may be required where roadworks, construction or other temporary changes alter the normal movement of traffic. The appropriate temporary traffic-management arrangement should be determined according to the road layout and applicable requirements.

Why Is the R106 Sign Important?

The R106 provides a direct and easily recognised instruction where traffic movement needs to be restricted to one direction. Clear command signage can help drivers understand the intended route and reduce uncertainty at intersections and controlled traffic areas.

The sign is most effective when it is positioned and maintained so that approaching drivers can clearly see the instruction before reaching the point where the required movement must take place.

R106 Sign Visibility and Placement

The placement of an R106 sign depends on the road layout, intersection design, visibility and applicable road-sign requirements. The sign should be positioned so that it is clearly visible to the road users for whom the instruction applies.

Public-road installations should follow the applicable South African road traffic sign specifications and the requirements of the relevant road authority.

R106 Road Signs in South Africa

R106 is part of the R100 series of command road signs used in South Africa. The Department of Transport's Road Traffic Signs Manual identifies R106 as the Proceed Right Only sign and specifies that the sign imposes a mandatory direction of travel.

For private roads, industrial properties, shopping centres, commercial developments and other controlled areas, directional road signage can also be specified according to the site's traffic-management requirements and applicable regulations.

Frequently Asked Questions About the R106 Road Sign

What does the R106 road sign mean?

R106 means Proceed Right Only. It instructs drivers to proceed only in the direction indicated by the right-pointing arrow.

Where is the R106 sign used?

The R106 is primarily used at intersections where drivers are required to proceed in a specific direction.

Is R106 a regulatory road sign?

Yes. R106 is a command or regulatory road sign that imposes a mandatory direction of travel.

What is the difference between R106 and R104?

R106 means Proceed Right Only and directs traffic to proceed to the right. R104 means Keep Right and is used to direct vehicles to pass to the right of an obstruction.

What is the difference between R106 and R109?

R106 indicates that drivers must proceed in the direction shown by the arrow, while R109 specifically indicates that drivers must turn right at the intersection ahead.

What is the temporary version of R106?

The temporary equivalent is TR106, which is used where temporary traffic conditions require the corresponding Proceed Right Only instruction.

Can R106 signs be used at private properties?

Directional command signs can be used in controlled private areas where traffic needs to follow a specific route, subject to the site's traffic-management requirements and any applicable regulations.

Can Signs4SA supply R106 Proceed Right Only signs?

Yes. Signs4SA can assist with R106 Proceed Right Only road signs for suitable road, property and traffic-management applications. Sign specifications, materials and installation requirements can be discussed according to your project.

Request a Proceed Right Only R106 Road Sign

Need a Proceed Right Only R106 road sign for an intersection, traffic-management project, private road or controlled property? Contact Signs4SA to discuss your road-sign requirements, provide your specifications and request a quotation.

Proceed Right Only signs come in a variety of styles and formats, including danger signs, warning signs, and caution signs. Danger signs are used to indicate an immediate threat that could cause serious injury or death, such as high voltage areas or hazardous materials. Warning signs are used to indicate potential hazards that could cause injury, such as slippery floors or falling objects. Caution signs are used to indicate potential hazards that could cause minor injury, such as low ceilings or uneven surfaces. Another type of safety sign is the Proceed Right Only sign, which is used to provide guidance on safe behavior. These signs can include instructions on how to use equipment or machinery safely, as well as reminders to wear personal protective equipment (PPE) or follow specific safety protocols. Proceed Right Only signs can also be used to ensure compliance with safety regulations. For example, fire safety signs are required by law in most public buildings and workplaces. These signs indicate the location of fire exits, fire extinguishers, and other fire safety equipment.

More About Proceed Right Only

Safety signs are an essential part of any workplace or public space. They are used to warn people of potential hazards, provide guidance on safe behavior, and ensure compliance with safety regulations. One type of safety sign is the Proceed Right Only sign, which is designed to alert people to potential dangers in a particular area. Proceed Right Only signs come in a variety of styles and formats, including danger signs, warning signs, and caution signs. Danger signs are used to indicate an immediate threat that could cause serious injury or death, such as high voltage areas or hazardous materials. Warning signs are used to indicate potential hazards that could cause injury, such as slippery floors or falling objects. Caution signs are used to indicate potential hazards that could cause minor injury, such as low ceilings or uneven surfaces. Another type of safety sign is the Proceed Right Only sign, which is used to provide guidance on safe behavior. These signs can include instructions on how to use equipment or machinery safely, as well as reminders to wear personal protective equipment (PPE) or follow specific safety protocols. Proceed Right Only signs can also be used to ensure compliance with safety regulations. For example, fire safety signs are required by law in most public buildings and workplaces. These signs indicate the location of fire exits, fire extinguishers, and other fire safety equipment. In addition to these types of safety signs, there are also specialized signs available for specific industries or hazards. For example, construction sites may use signs to indicate the location of underground utilities or to warn of falling debris. Healthcare facilities may use signs to remind employees to wash their hands or to indicate the location of first aid supplies. When selecting safety signs, it is important to choose signs that are appropriate for the specific hazard or situation. Signs should be placed in prominent locations where they are easily visible, and should be made from durable materials that can withstand harsh environmental conditions. By using safety signs effectively, businesses and organizations can help protect their employees, customers, and visitors from harm.

Customer Reviews